产品banner
您当前的位置 : 首 页 > 产品中心 > 塔盘设计

塔盘设计

2021-07-22 15:56:40
塔盘设计
详细介绍:


塔盘设计小编分享塔内件保养方法如下:

1.首先保养注意以下事项:

塔内件的工作环境与条件应完全符合规定要求,包括室温、相对湿度、电源电压、安装基础(机台周围一般要求无震动、无腐蚀性介质、无较强电磁场干扰),另外有些仪器对环境还有特殊的要求,应严格按照使用说明书进行维护与保养;

2.夹具:

本机台所附夹具皆经电镀处理,在一般使用状态下仅需以干布去除灰尘即可,如长时间不使用请以干净棉布沾上少许防锈油在夹具表面擦拭即可。

3.外壳:本机台外部钣金皆经过高级烤漆处理,故仅需以干布擦拭,去除灰尘即可。如长时间不使用,请以外罩遮盖。

机构:塔内件机构皆为钣金或铝型材及防尘罩所遮盖,在一般使用状态下,无须保养。

4.清洁方法:

为了保证仪器外观的整洁,请定期使用软布清洁仪器。对于顽固的污渍可以用比较柔软的布蘸温和的清洁剂来去除。塔盘设计小编提醒大家,不要使用强力清洁剂如苯、丙酮、稀释剂或者研磨清洁剂来擦拭,以避免对外壳造成损坏。为了安全起见,请在清洁仪器前将外部电源切断。



The tower tray design editor shares the maintenance methods of tower internals as follows:

1. First, pay attention to the following matters in maintenance:

The working environment and conditions of the tower internals should fully meet the specified requirements, including room temperature, relative humidity, power supply voltage, installation foundation (generally no vibration, no corrosive medium, and no strong electromagnetic field interference are required around the machine). In addition, some instruments are The environment also has special requirements, and maintenance and maintenance should be carried out in strict accordance with the instruction manual;

2. Fixture:

The fixtures attached to this machine are all electroplated. Under normal use, you only need to use a dry cloth to remove dust. If you will not use it for a long time, please wipe the surface of the fixture with a clean cotton cloth moistened with a little anti-rust oil.

3. Shell: The external sheet metal of this machine is treated with high-grade paint, so it only needs to be wiped with a dry cloth to remove dust. If you will not use it for a long time, please cover it with an outer cover.

Mechanism: The internal parts of the tower are covered by sheet metal or aluminum profiles and dust cover. Under normal use, no maintenance is required.

4. Cleaning method:

In order to keep the appearance of the instrument tidy, please clean the instrument regularly with a soft cloth. Stubborn stains can be removed with a soft cloth dipped in a mild detergent. The tray design editor reminds everyone not to use strong cleaners such as benzene, acetone, thinner or abrasive cleaners to wipe to avoid damage to the shell. For safety reasons, please cut off the external power supply before cleaning the instrument.

标签

上一篇:没有了
下一篇:气体冷却塔塔盘设计2021-07-22

近期浏览:

全国咨询热线

18653185598

地址:山东省烟台市福山区福新路96号

电话:0535-2133512 

手机:18653185598

手机:13022733777

邮箱:sd_kfy@cnkaifengyuan.com


微信扫一扫

手机官网

  • 网站首页
  • 咨询电话
  • 返回顶部